This website uses cookies. By continuing to use this page, you agree therefore use of them.

Equipment

CMP 25/CMP25 IN LINE

 CMP25 in Line

The CMP25 kit has been designed to semplify and to increase the accuracy of the advance angle measure on the rotative pumps. The advance of the pump is monitored by a mechanical tracer point placed in the apposite space in which is localized the automatical mechanism that check the advance angle. The tracer point’s movements are changed in a proportional electrical signal and, opportunely elaborated by the microprocessor, visualizated on the digital display directly on
degree. The tracer point and the visualization box could be coupled to any diesel test bench; could be feeding at 220Vac through the apposite transformator, or could be
feeding by a tension of 12V always present on the test bench. So it could be used also with a pump mounted on the vehicle, if there are enought space.
The base kit is supplied for the advance measure of the following pumps:

Lucas DPA, DPC e DPS

Bosch VA e VE

 

 

 

 

 

 

CARATTERISTICHE TECNICHE
   DIMENSIONS AND WEIGHT
Dimensions (WxLxH) 125x190x65 (CMP25) - 138x190x69(CMP 25 In Line)
Weight 0.6Kg (CMP25) - 1.46Kg (CMP25 In Line) 
   
ELECTRICAL DATA  
Supplied 12V +/- 15%
Electrical features 220V +/- 15% - 50/60Hz
 
SENSOR
Range of sensor reading 0÷15mm (CMP25)  -  0÷25mm (CMP25 In Line)
TEMPERATURE
Operating temperature 10 ÷ 80°C